How to add hem allowance

Adding seam allowance is pretty straight forward as we've learned in the previous tutorial. You follow the edge of the pattern and add a certain amount extra to all edges. However, adding hem allowance requires a bit more attention. You should always think about how the hem will be folded. If the hem gets wider, the hem allowance will need to get narrower, and vice versa.

Here's an example of how to add seam allowance to an a-line skirt. The hem gets wider so we will need to check how it will be folded before we can add hem allowance. Align the center front with the folded edge of the fabric. If you're re-drawing the pattern on paper align with paper edge.

1.  Add seam allowance to all other edges.

2. Add a notch where hem allowance begins. This marks the fold line for the hem. Transfer any other notches and pattern markings.

3. Add hem allowance. Here, we're adding 4 cm (1 1/2").

4. Pivot the ruler, following the curve.

5. Flip down the pattern, matching the outer corner with the notch and making sure that the middle front edge is lined up with the fold line. Add seam allowance along side seam until the line meets hem line.

6. Remove the pattern. Cut along the lines, making sure to cut away all tracing lines.

If the hem is very wide, such as in a circle skirt, it's easier to add a minimal amount of hem allowance and finish it with a rolled hem. Another option is drafting a hem facing instead.

 


 

Related Posts

  • Small bust adjustment
    Small bust adjustment

    If your bust is smaller than a b-cup you'll want to adjust your patterns by taking out the extra fabric around the bu...

  • Adding color blocking details
    Adding color blocking details

    Color blocking is a fun and easy way to add your own flare to a simple design. Today's patternmaking tutorial will sh...

  • Tranferring bust dart location
    Tranferring bust dart location

    Welcome to our first post of 2016 which is the start of a new patternmaking series. I've had a lot of fun illustratin...

0 comments

Write a comment

Comments are moderated