Olsen dress sew-along - Part 4

Olsen dress sew along step 4

Let's start sewing!

STEPS 1 & 2

First up  you'll sew the side seams of both bodice and skirt pieces. You've got some options on seam finishes:

• French seams. I strongly recommend this for light weight and especially sheer fabrics. This is what I've used for the sample dress. French seams eliminate the need to zig zag the edges.

• Finish raw edges first - use your overlocker/serger if you have one, or a zig zag stitch on your regular sewing machine - then sew the seam. Press open.

• Sew the seam first, then finish raw edges, sewing the two layers together. Press to one side.

Remember to match the notches. Make sure that right sides are facing, except if you're using french seams.

Sew side seams of skirt and bodice

STEP 3

Once you've sewn and pressed the bodice, turn it so that right side is out. You will now slip it inside the skirt and match the edges of the waist.

 Slip bodice inside skirt

Check that the side seams match nicely.

Match side seams

Pin waist seam

Sew waist seam.

Match side seams

The garment will now look huge but remember that the waist will be cinched with an elastic. You can at this point have a fitting just to test that the waist seam sits where you want it (designed to be just below your natural waist.)

STEP 4

There are two bias cut strips for the neckline. The reason these are a different length is so that the seam wouldn't end up at the front. (The reason there are two pieces is simply to save fabric and make cutting easier, you can cut just one piece if you prefer!) Sew those two pieces together at an angle. Trim the seam allowance and press the seam open.

Sew ends of bias tape together

Trim seam allowance and press seam open

STEP 5

Now, let's make the strips into bias tape. You can of course use the amazing bias tape maker if you have one. To make things easier later, you'll want to try and make one side a tiny bit wider. This side will later be on the wrong side and will be easier to catch in the stitch when you're giving yourself a bit more room for error.

First, fold in half lengthwise and press. Then use this crease as a guide to fold the edges to. Press again and you're done.

 Fold bias tape lengthwise

Fold edges to the middle

finished bias tape

Next up, steps 6 to 11 will show you how to attach the bias tape, finishing the neckline and armholes.

 


 

Related Posts

  • Hagen skirt sew-along - Part 5
    Hagen skirt sew-along - Part 5

    We've sewn the zipper and now we’ll attach the lining to the zipper tape. This is traditionally done by hand from the...

  • Hagen skirt sew-along - Part 4
    Hagen skirt sew-along - Part 4

    Start by sewing the darts. Pop over to our tutorial on how to sew darts. Note that the dart legs are not straight but...

  • Hagen skirt sew-along - Part 3
    Hagen skirt sew-along - Part 3

    Today we'll be cutting the fabric for our Hagen skirts. We are using black wool suiting and will be cutting the third...

0 comments

Write a comment

Comments are moderated